R7-113bP VACATE STALL WHEN CHARGING COMPLETED (PLAQUE) Requirements
Application notes for R7-113bP VACATE STALL WHEN CHARGING COMPLETED (PLAQUE). The official manual distinguishes mandatory standards, recommended guidance, and optional applications; consult the linked sources for the provisions that apply.
California Application & Variants
Use below R7-113 or an R7-114-series charging sign where this additional restriction applies. Do not substitute it for the primary parking or charging sign.
1. When VACATE STALL WHEN CHARGING COMPLETED (PLAQUE) Is Used
Requires a vehicle to leave the stall when charging is complete.
- Parking-zone and curb-use review
2. Placement and Application Notes
Position R7-113bP below R7-113 or the applicable R7-114-series charging sign..
- Place the sign where the intended road users have a clear, unobstructed view on approach.
- Use the mounting height and lateral placement specified for the sign and installation type.
- Use sign assemblies and supplemental plaques only as provided in the applicable manual and approved design.
3. Layout Sizes and Visibility Considerations
Linked-layout dimensions: 12" × 6". Check the applicable MUTCD and agency requirements for the required installation size.
- Choose size based on roadway speed, sight distance, and mounting location.
- Use the visibility and material requirements specified for this sign and installation.
4. Sign Selection Checks
- Match R7-113bP to the intended regulation and actual site arrangement.
- Use below R7-113 or an R7-114-series charging sign where this additional restriction applies. Do not substitute it for the primary parking or charging sign.
- Select the size and installation using the applicable California manual provisions and responsible agency requirements.
Related Resources
Browse All Sign Series
Verify R7-113bP Requirements
This is an educational reference. Verify sign use, size, placement, and application against the current CA MUTCD, Caltrans sign specifications, Standard Plans, and the reviewing agency. Official source links are gathered in one place.
View official sourcesEducational reference only. This is not an official Caltrans, FHWA, or local agency publication and is not legal or engineering advice. Always verify sign selection, size, placement, spacing, and application against the current CA MUTCD 2026, Caltrans sign specifications, Standard Plans, project documents, and the reviewing agency’s requirements. Local jurisdictions may impose additional requirements, and final selection, placement, and dimensions may require engineering judgment or agency approval. Reference editions: California MUTCD 2026 (effective January 18, 2026) and the Federal MUTCD 11th Edition with Revision 1.
Need to Rent or Purchase This Sign? Contact Public Ready.
Public Ready supports sign selection, project-ready sign packages, and equipment sourcing through qualified providers — with expert support built for compliance.