W5-2a NARROW UNDERPASS Requirements
Application notes for W5-2a NARROW UNDERPASS. The official manual distinguishes mandatory standards, recommended guidance, and optional applications; consult the linked sources for the provisions that apply.
California Application & Variants
Use the underpass design where the narrow-bridge conditions in California section 2C.18 apply to an underpass. Evaluate approach width, clearance, sight distance, and appropriate object markers or delineation.
1. When NARROW UNDERPASS Is Used
Warns of restricted horizontal clearance at an underpass.
- Roadway geometry and traffic-control review
2. Placement and Application Notes
Position W5-2a select placement using the actual approach, sight distance, applicable California manual provisions, and responsible agency requirements..
- Place the sign where the intended road users have a clear, unobstructed view on approach.
- Use the mounting height and lateral placement specified for the sign and installation type.
- Use sign assemblies and supplemental plaques only as provided in the applicable manual and approved design.
3. Layout Sizes and Visibility Considerations
Linked-layout dimensions: 30" × 30"; 36" × 36"; 48" × 48". Check the applicable MUTCD and agency requirements for the required installation size.
- Choose size based on roadway speed, sight distance, and mounting location.
- Use the visibility and material requirements specified for this sign and installation.
4. Sign Selection Checks
- Match W5-2a to the actual approach and traffic condition.
- Use the underpass design where the narrow-bridge conditions in California section 2C.18 apply to an underpass. Evaluate approach width, clearance, sight distance, and appropriate object markers or delineation.
- Select application size and installation using the California manual and agency requirements.
Related Resources
Browse All Sign Series
Verify W5-2a Requirements
This is an educational reference. Verify sign use, size, placement, and application against the current CA MUTCD, Caltrans sign specifications, Standard Plans, and the reviewing agency. Official source links are gathered in one place.
View official sourcesEducational reference only. This is not an official Caltrans, FHWA, or local agency publication and is not legal or engineering advice. Always verify sign selection, size, placement, spacing, and application against the current CA MUTCD 2026, Caltrans sign specifications, Standard Plans, project documents, and the reviewing agency’s requirements. Local jurisdictions may impose additional requirements, and final selection, placement, and dimensions may require engineering judgment or agency approval. Reference editions: California MUTCD 2026 (effective January 18, 2026) and the Federal MUTCD 11th Edition with Revision 1.
Need to Rent or Purchase This Sign? Contact Public Ready.
Public Ready supports sign selection, project-ready sign packages, and equipment sourcing through qualified providers - with expert support built for compliance.